HAL-LOK
Hydraulic Threaded Ball Valve
SKU BTH-G1-25F
Fluid & Gas Control
Hydraulic Threaded Ball Valve. Select the documented size and construction for quotation.
Technical specification
| Ball Valve Sealing Material Table | Ball Valve Sealing Material Table | Ball Valve Sealing Material Table |
|---|---|---|
| Category | Material | Application |
| Ball seat seal | Polyformaldehyde(POM) | Mainly used for non corrosive oil, water, gas, -30 °C to +100 °C |
| Ball seat seal | PEEK | It has good corrosion resistance and a wide temperature range, -60 °C to +250 °C |
| O-ring | Nitrile butadiene rubber(NBR) | Used for non corrosive media such as oil, water, air, etc. - 35 °C to +100 °C |
| O-ring | Fluororubber(FPM) | Good chemical adaptability, suitable for oil and concentrated acids, -25 °C to +200°C |
| O-ring | Ethylene-propylene rubber(EPDM) | Used for ammonia, steam, formaldehyde, ethylene glycol, not resistant to mineral oil, -50 °C to+130 °C |
Technical specification
| The working torque of the ball valve depends on the pressure and the sealing material of the ball seat. Theworking medium in the figure is oil, and the seal is POM (if water*1.2 times, air*1.4 times;granular powder*1 .6times)actuator torque =1.2*torque ( 1.2 is the safety factor) |
|---|
Models, sizes and drawing dimensions
| Catalogue basic reference | Specification |
|---|---|
| BTH-G1-25F | Internaldiameter(mm) / 4 / 6 / 8 / 10 / 13 / 20: 25; D / G1/8 / G1/4 / G3/8 / G1/2 / G3/4: G1; L(mm) / 69 / 73 / 85 / 96: 115; A(mm) / 55.5 / 58.0 / 59.0 / 78.0: 79.0; B(mm) / 107 / 160: 160; MaximumWorkingPressure(bar) / 300 / 200: 200 |
Catalogue drawing dimensions are nominal. Pressure and temperature ratings depend on the selected material, seals and configuration. Confirm the complete manufacturer ordering code with the quotation.
Source references and links are provided in the product documentation fields.
Technical Specifications
| Model | Hydraulic Threaded Ball Valve |
|---|